Press Brake Guarding System
The LZS-003-HS press brake guarding system offers a highly effective solution for both operator safety and machine productivity. The LZS-003-HS system is Category 4 compliant and meets the world's most demanding international safety standards.

The LZS-003-HS features a laser transmitter and receiver that are mounted on the upper beam of the press. Two continuous parallel fl at-band lasers provide a 40mm protective zone directly below the punch, allowing the operator to remain close to the work piece as the tools close at high speed. If an obstruction is detected, the beam movement is stopped so that the punch cannot make contact with the obstruction.

The dual laser design is suitable for high speed press brakes with a fast closing speed of >150mm/s. As the tools close the bottom laser is muted just above the work piece triggering a deceleration of the machine to pressing speed while the top laser continues to provide protection until the tools enter the bending phase of the stroke.

Benefits
•Designed to ensure maximum safety without compromising productivity.
•Allows tools to close at high speed, increasing productivity.
•Complex shapes can be achieved in high speed with Tray/Box Mode.
•Minimal slow speed travel in each stroke ensures maximum productivity is achieved.
•The intelligent LCD operator control with on-screen instructions and easy to read messages makes the system simple to operate.
•The mute point is automatically detected, easily set and continuously monitored.
•Encoder feedback provides continuous closed loop monitoring of the speed and stopping distance of the pressing beam.